Technical Guides
Technical guides and supporting reads.
-
How to Choose a Release Agent by Formwork Material
Compare steel, wood, plastic, and repaired formwork when selecting a concrete release agent, then validate coverage and timing against product data and a representative trial.
Read guide -
Can Too Much Release Agent Cause Staining on Concrete?
Learn how excess or uneven release-agent application may contribute to concrete staining, what evidence to record, and how to investigate other possible causes.
Read guide -
How Temperature and Humidity Affect Release Agent Performance
Learn what to record about temperature and humidity during release-agent application and how to validate adjustments without assuming a universal drying time.
Read guide -
Release Agent Application: Spraying, Coverage, and Quality Control
A field guide to setting a repeatable concrete release-agent application method, checking coverage, and recording conditions before casting.
Read guide -
Water-Based Release Agent vs. Waste Oil: Compare Cost and Surface Risk
Compare waste oil and water-based release agents from a practical job-site point of view, including defects, cleanup, and hidden costs.
Read guide -
Bugholes in Concrete: Why Vibration Alone Fails
Learn why vibration alone cannot eliminate bugholes in concrete, and how formwork, release-agent coverage, mix workability, and placement control work together.
Read guide